Mamiya DM System Manuel d'utilisateur télécharger pdf (Page 81)

Chapter 1 - Basic info



Chapter 6 - Exposure Modes

To change from the self timer setting to the mirror up setting, press the shutter button so the

mirror goes into the upright position and once the set time has expired the shutter will release,

and the mirror will return to the lower position. Separately purchased electronic cable release

RE401 can be used to eliminate camera shake.



To cancel mirror up delay photography, turn to the drive dial to any setting other than “M.UP” or

turn the self timer setting off.



By turning the drive dial to the “M.UP” setting (mirror up mode) and selecting the self timer

setting, mirror up delay photography can be taken. Another method is to select self timer then

turn the drive dial to “M.UP”.

When using auto focus the operational

method is the same as 1 to 3.

1. Press the self timer button and turn

the front dial to “On”

2. Turn the rear dial to select the time

needed. 0.5/ 1 second to 10 seconds

allows for increases by the second,

while 10 to 90 seconds increases

by 10 seconds per turn. For 2 to 10

minutes the value increases by the

minute and 10 to 60 minutes increases

by 10 minutes per turn.

3. Line up the photograph through the

viewﬁnder and half press the shutter

button to ensure the focus and framing

is correct.

4. Press the shutter button completely

and the mirror will go to the upper

position, then after the set time the

shutter will release and the mirror will

return to the lower position.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 201 202

Pas de commentaire

Mamiya DM System Manuel d'utilisateur Page 81